點擊圖片查看原圖
套裝鎂合金犧牲陽極
鎂陽極與管道焊接
鋁熱焊的文字說明
1、首先要把管道的防腐層破壞一塊,和鋁熱模具大小一樣的長方形口
2、把鎂陽極包上面的電纜線放在鋁熱焊模具下面的缺口處，在把模具放在管道上，模具蓋打開能看到電纜，將小鐵片碗形朝上放在模具底部套裝鎂合金犧牲陽極xf741231
3、焊接分大包小包，先倒大包焊劑，在把小的引火粉均勻的倒在上面，順便在模具點火口的邊沿到點，然后把模具蓋蓋住
4、用點火槍在磨具口點火，（點火時注意帶手套，臉不要直視點火口，用鉗子壓住模具蓋）瞬間點燃，電纜線與管道焊接成一個銅疙瘩，焊接的非常牢固
5、然后用補傷棒將傷口填平
套裝鎂合金犧牲陽極
6、用火加熱補傷片，讓補傷片緊貼上口，將傷口補住...
7、Two, magnesium anode and pipe welding
8、Description of thermit welding
9、1, first of all, destroy the anticorrosion layer of the pipeline, the same rectangle as the size of the aluminum hot mold.
10、2. The cable above the magnesium anode is placed under the gap under the aluminum heat welding mold. The mold is placed on the pipe. The die cover opens to see the cable, and the small iron sheet is placed upwards in the bottom of the mold.
11、3, the welding is divided into large package, first pour a large package of flux, in the small fire powder even on the top, by the way the edge of the mold point fire mouth to the point, and then cover the mold cover.